48 48 TAPES Call: 1-800-537-0351 · Fax: 1-800-379-9903 Kapton* Hot Air Leveling & Wave Soldering Tape Will withstand molten solder dip and remove cleanly. Withstands temperature to 600°F. Transparent, 1 mil amber color Kapton* film with a silicone adhesive formulation. May be used for other hi-temp applications including coils, capacitors, and other transformers. For use with all H.A.L. machines. 2.9 mil total thickness. Tensile Strength: 30 lbs./inch width. 25 oz./inch width adhesion to steel. 36 YARD ROLLS. 3" CORE. ESD Transparent Tape Item # Width 1-47 48-143 1656-12 1656-05 1656-75 1656-10 /4" /2" 3 /4" 1" 1 1 $ 5.64 8.36 10.52 15.91 5.17 7.68 9.70 14.59 This semi-transparent, clear tape is used for sealing bags and DIP Tubes. The 2.4 mil thick cellophane film is coated with a rubber adhesive that is long lasting, easy to tear and anti-static. The tape is imprinted with an antistatic warning message. This tape generates very low levels of triboelectric charge (less than 50 volts) when unwound from roll or removed from most surfaces. 3" Core | 72 Yards Item# 1660-05 1660-75 1660-10 1660-20 Width 1 3 /2" /4" 1" 2" $ 3.18 4.26 5.33 10.67 1-35 36-95 2.58 3.45 4.32 8.66 Conductive Grid Tape Low Static Polyimide Film Tape Kapton* Hi-Temp Tape 500ºF Amber color polyimide film tape with low electrostatic discharge at unwind and removal from PCB. Conventional polyimide tape typically generates over 10,000 volts static charge. In contrast, 1657 Tape will generate less than 150 volts. Silicone adhesive. 2.6mil total tape thickness. Adhesion to steel: 22 oz./ in. width. Use where high static charge is of concern. Mask printed circuit boards during wave solder or hot air levelling process. Use as masking tape in the cleanroom. STATIC CHARGE (@50% RH, 70oF): Removal from roll: Item # < 150 Volts 1657-12 Removal from PCB: 1657-05 < 50 Volts 1657-75 36 YARD ROLLS. 1657-10 3" CORE A three-layer tape with non-sparking surfaces both inside and outside of tape. A conductive grid is buried between two anti-static copolymer layers that cannot shed or rub off and provides an effective static shielding Item No. ability. Thickness: 1.5 mil. 1604-05 118 FOOT ROLLS. 3" 1604-75 CORE. 1604-10 1604-20 Width /2" 3 /4" 1" 2" 1 $ 2.25 3.90 4.89 7.80 1-143 *DuPont Trademark. Width 1-47 48-143 Polyimide Solder Wave Disc /4" 1 /2" 3 /4" 1" 1 $ 10.86 19.38 26.47 32.08 9.90 17.67 24.13 29.25 Low Static Polyimide Tape Ideal for PCB applications, these 2.5mil thick polyimide discs are flame and chemical resistant. Designed to withstand temperatures up to 500° F. Housed on a 3" core containing 2000 polyimide discs per roll. Item # Width 1-11 12+ 1671-05 1671-10 1671-12 1671-18 1671-316 1671-38 1671-516 1671-58 1671-75 /2" 1" 1 /4" 1 /8" 3 /16" 3 /8" 5 /16" 5 /8" 3 /4" 1 $ 36.60 28.77 19.02 10.48 15.31 24.43 21.44 26.35 33.12 $ 34.23 26.91 17.79 9.80 14.33 22.85 20.05 24.65 30.99 Developed for excellent dielectric strength and a high heat resistance of up to 500° F, this low-static polyimide tape is removable from roll and circuit boards without leaving residue. · · · · Total Thickness: 2.5mil Adhesive Thickness: 1.5mil Film Thickness: 1mil Roll length: 36 yards on a 3" core Item # Width 1-11 12+ 1678-05 1678-10 1678-12 1678-20 1678-75 /2" 1" 1 /4" 2" 3 /4" 1 $ 16.27 30.58 9.55 61.61 22.98 $ 14.83 27.88 8.71 56.17 20.96
Magnified View - Please use mouse to move page for easier readability